project
A* – angle bracket
An interesting solution, even more engineering than architectural. The combination of simplicity of form and functionality - otherwise you can not describe this project.
The workstation implemented in the form of a console is a type of support or bracket with one rigidly fixed end at the second free end.
Roketbank office 3D model
Moscow, Paliha 10–5
An interesting solution, even more engineering than architectural. The combination of simplicity of form and functionality - otherwise you can not describe this project.
The workstation implemented in the form of a console is a type of support or bracket with one rigidly fixed end at the second free end.
The workstation implemented in the form of a console is a type of support or bracket with one rigidly fixed end at the second free end.
Roketbank office 3D model
Moscow, Paliha 10–5
no–diploma–ARCh–017
Moscow, Paliha 10c5
Customer: Roketbank
Design: Kirenkov Gleb, Kolesnikov Alex
Engineer, installation: Yegorov Oleg, Goy Vladimir
Moscow, Paliha 10c5
Customer: Roketbank
Design: Kirenkov Gleb, Kolesnikov Alex
Engineer, installation: Yegorov Oleg, Goy Vladimir
Project Description:
The task was interesting - to create a workplace, a horizontal working area with a single vertical support.
Workplaces should have been located on both sides of the bearing wall. The place was designed for one person with a laptop or two people who are in rapid negotiations - the outside dimensions are 800 x 650 x 80 mm.
It was decided to use two materials - a bearing, 10-mm metal, and for the worktop - a custom made concrete slab.
The task was interesting - to create a workplace, a horizontal working area with a single vertical support.
Workplaces should have been located on both sides of the bearing wall. The place was designed for one person with a laptop or two people who are in rapid negotiations - the outside dimensions are 800 x 650 x 80 mm.
It was decided to use two materials - a bearing, 10-mm metal, and for the worktop - a custom made concrete slab.
3D Axonometry console
Metal console on a chemical anchor and concrete table
Описание проекта:
Задача была интересно - создать рабочее место, горизонтальную рабочую площадь с одной несущей вертикальной опорой.
Рабочие места должны были быть расположены по обе стороны от несущей стены. Место было рассчитано на одного человека с ноутбуком или на двух людей, ведущих быстрые переговоры - габариты по внешним сторонам 800 x 650 х 80 мм.
Было решено использовать два материала - несущий, 10-мм металл, а на роль столешницы - бетонную плиту, выполненную под заказ.
Задача была интересно - создать рабочее место, горизонтальную рабочую площадь с одной несущей вертикальной опорой.
Рабочие места должны были быть расположены по обе стороны от несущей стены. Место было рассчитано на одного человека с ноутбуком или на двух людей, ведущих быстрые переговоры - габариты по внешним сторонам 800 x 650 х 80 мм.
Было решено использовать два материала - несущий, 10-мм металл, а на роль столешницы - бетонную плиту, выполненную под заказ.
3D Axonometry console
Metal console on a chemical anchor and concrete table
The metal construction had the form of a Cyrillic letter "G" (Г in Russian) and was attached to two chemical anchors with a small side to the wall. We also let the diagonal in order to maintain the rigidity of the structure.
The chemical anchor works according to the principle of area capture:
– the drilled hole in the wall is filled with chemical composition
– anchor is driven into the hole of the metal structure directly into the filled hole of the wall
– the chemical composition is fixed not only between the walls of the hole and the fastening element-anchor, but also fills any planes and cracks with which it contacts
– the result is a mounting area larger than the area of the hole
The chemical anchor works according to the principle of area capture:
– the drilled hole in the wall is filled with chemical composition
– anchor is driven into the hole of the metal structure directly into the filled hole of the wall
– the chemical composition is fixed not only between the walls of the hole and the fastening element-anchor, but also fills any planes and cracks with which it contacts
– the result is a mounting area larger than the area of the hole
3D Axonometry console
Metal console on a chemical anchor
The metal construction had the form of a Cyrillic letter "G" (Г in Russian) and was attached to two chemical anchors with a small side to the wall. We also let the diagonal in order to maintain the rigidity of the structure.
The chemical anchor works according to the principle of area capture:
– the drilled hole in the wall is filled with chemical composition
– anchor is driven into the hole of the metal structure directly into the filled hole of the wall
– the chemical composition is fixed not only between the walls of the hole and the fastening element-anchor, but also fills any planes and cracks with which it contacts
– the result is a mounting area larger than the area of the hole
The chemical anchor works according to the principle of area capture:
– the drilled hole in the wall is filled with chemical composition
– anchor is driven into the hole of the metal structure directly into the filled hole of the wall
– the chemical composition is fixed not only between the walls of the hole and the fastening element-anchor, but also fills any planes and cracks with which it contacts
– the result is a mounting area larger than the area of the hole
3D Axonometry console
Metal console on a chemical anchor
Worktop was made out of concrete with internal reinforcement. The ground surface was covered with a waxed composition, which gave a different tactile effect.
The table top is placed on the console platform, fixed with rubber glue applied in advance.
The total weight of the console is ~ 150 kg, but modern building technologies in the field of chemistry allow to sustain such weight on two fasteners. And even more than that, people are allowed to stand on the countertop without fear of collapse of the structure and wall on which it is fixed.
3D Axonometry "table top" console
Concrete Countertop
Worktop was made out of concrete with internal reinforcement. The ground surface was covered with a waxed composition, which gave a different tactile effect.
The table top is placed on the console platform, fixed with rubber glue applied in advance.
The total weight of the console is ~ 150 kg, but modern building technologies in the field of chemistry allow to sustain such weight on two fasteners. And even more than that, people are allowed to stand on the countertop without fear of collapse of the structure and wall on which it is fixed.
The table top is placed on the console platform, fixed with rubber glue applied in advance.
The total weight of the console is ~ 150 kg, but modern building technologies in the field of chemistry allow to sustain such weight on two fasteners. And even more than that, people are allowed to stand on the countertop without fear of collapse of the structure and wall on which it is fixed.
3D Axonometry "table top" console
Concrete Countertop
3D Axonometry metal and concrete
Under table and table top
3D Axonometry metal and concrete
Under table and table top
3D Axonometry metal and concrete
Under table and table top
3D Axonometry metal and concrete
Under table and table top
3D Axonometry metal and concrete
Section of the cabinet along the vertical axis
3D Axonometry metal and concrete
Section of the cabinet along the vertical axis
3D Axonometry of the bearing wall
console details: table and table top
3D Axonometry of the bearing wall
console details: table and table top
3D Axonometry of the bearing wall
console details: table and table top
3D Axonometry of the bearing wall
console details: table and table top
